gate loop detector installation
vehicle loop detector layoutdoorking tech support
doorking 9410 manual
loop detector troubleshooting
doorking loop wire
doorking 1601 manual
doorking 9409-010

This “Self-tuning” loop detector is designed to be used with DoorKing vehicular gate operators ONLY and control an individual loop. This “Self-tuning” loop detector is designed to be used with DoorKing vehicular gate operators ONLY and control two individual loops (including 2 series wired DoorKing plug-in loop detector P/N. 9410-010 (Single. Channel). If other loop detectors are used, refer to the installation instructions supplied with those.DoorKing Part Number Single-Channel Loop Detector 9410-010 This “Self-tuning” loop detector is designed to be used with DoorKing vehicular gate operators User Manual: DoorKing DoorKing 9410 Single-Channel Loop Detector Installation Manual Installation Manual. These loop detectors are designed to be used with DoorKing vehicular gate operators Refer to the LOOPINFO manual for information on installing in-ground. The DoorKing 9410-010 Loop Detector is designed for use with DoorKing vehicular gate operators only. The detector plugs into loop detector ports on the gate These loop detectors are designed to be used with DoorKing vehicular gate operators only and control two individual loops. The detector plugs into loop detector DoorKing's 9411 plug-in loop detector (sold separately) and a down loop MUST be installed directly under the arm for this detection system to function (see DoorKing 9150 Series Manual Online: Loop Detector Wiring. To help protect the operator from accidentally closing on vehicles in the gate's path,