There are two crash protector bobbin heads, two spacers, two 10mm washers and two M10 x 1.25mm x 90mm bolts along with the usual fitting instructions which are as follows 1. Remove original left and right engine / frame mounting bolts. 2. Fit Evotech crash protector bobbins to both sides using the spacers, bolts and washers supplied. 3. Install Instructions 464.8 kB. Evotech Performance rear axle spindle protector bobbins are incredibly easy to fit and are retained by stainless steel spindles and stainless nyloc nuts, for added security. Made in England from high performance engineering polymer. These rear axle sliders include two sliders, spindle, nuts, washers and fitting EVOTECH Harness, BACK D-ring, Qwik-Fit leg straps, Qwik-Fit chest strap, Standard (STD) Product discontinued. view details Where to Buy . 10105931 . EVOTECH Tower Harness w/integral backpad, BACK, Crank HIP & CHEST D-rings, Qwik-Connect leg straps, Qwik-Connect chest strap, Shoulder & Leg Padding, Standard (STD), Padded Saddle, Safety Step Installation Instructions REAR SPINDLE BOBBINS SINGLE SIDED BOBBIN Kit Contents A 1 x Spindle B 1 x Bobbin Spacer C 1 x Hub Stop D 1 x Bobbin Head E 2 x Nyloc Nuts F 2 x Washers evotech-performance.com. Title: SpindleBobbinInstructions-NewStyle Created Date: 1/28/2016 7:38:42 AM Step 18: reconnect the lock cable. Step 19: install the four supplied spacers over the rubber grommets and bolt the new tidy tail to the original metal plate. Step 20: reinstall the rear tail, tool tray and exhaust valve motor. Step 21: reinstall the seat and enjoy your new EvoTech tail tidy. T. Installation Instructions DUCATI MONSTER 1200 R EXHAUST HANGER Product Reference - 13049 Kit Contents A 1 x Exhaust Hanger B 1 x Blanking Plate C 2 x M8 - 20 Socket Button Head Screws D 2 x M8 - 16 Socket Button Head Screws E 4 x M8 Washers The evotech ones looks nicer than the cox and although might be a little tricky to fit, it wasnt that differcult. I didnt cut anything. 04-11-2012, 04:59 PM #13 Evotech Performance have supplied a new LED combination brake, side and number plate light. A new aluminium CNC machined bezel is supplied to house the LED rear light. EP have supplied a plastic vacuum formed under tray to finish the under seat area. All required fixings are supplied in the kit. Fitting Instructions available here i have just recieved my Evotech performance radiator guard for my 2020 ktm 1290 superduke r, so i decided to do a little how to video on fitting it. i couldn Installation Instructions DUCATI SCRAMBLER 2015 CRASH PROTECTION Product Reference - 12248 Kit Contents A 1 x M12 Spindle B 1 x LH Frame Shim C 2 x Bobbin Heads D 2 x Bobbin Spacers E 2 x M12 Nyloc Nuts F 2 x M12 Washers Fit the 2 larger screws that go through the bracket at the bottom of the fairing. This system is a little dodgy. The rubber grommet should be carefully pushed back through the h*** in the bracket with a flat-bladed screwdriver before fitting the special hex bolt. Once everything is in place, make sure you tighten all 12 screws. Installation Instructions YAMAHA XSR900 TAIL TIDY Product Reference - 13226 Kit Contents A 1 x Main Tail Tidy B 1 x Cover Bracket C 1 x Light Mount D 1 x Reflector Bracket E 1 x LED Light Unit & Nuts F 1 x Wiring Connector G 1 x Reflector H 1 x Rubber Cap J 4 x M6 - 25 Button Screws K 4 x M6 Nyloc Nuts L 4 x M6 Washers M 4 x M4 - 10 Countersink Screws N 4 x M4 Washers O 5 x Cable Ties Installation Instructions YAMA