ncm-300 2 1 supply air sensor c w/e y r g zone 3 t'stat c w/e y r g one zone zone 1 t's tat m6 m4 m2 m1 zone 3 motor m6 m4 m2 m1 zone 2 motor m6 m4 m2 m1 zone 1 motor r c 24 vac t'former NCM S7 Manual STEP 7 NCM S7 S7-CP for S7-300 / S7-400. This Manual on SIMATIC NET NCM S7 for Industrial Ethernet 6 SIMATIC NET NCM S7 for Industrial Ethernet Release 6/2003 C79000-G8976-C129-07 Audience This manual is intended for personnel responsible for installing and programming DCM 300 two door controller. Available in both serial and Ethernet options, the DCM 300 is a low cost, intelligent two-door controller range that is designed to interface third-party read heads with the CEM AC2000 access control system. Offering layers of system resilience, the DCM 300 has an internal database giving full off-line card This document describes operation of TCM 300 and TCM 320 modules available in variations for following frequencies: TCM 300 & TCM 320: 868.300 MHz TCM 300U & TCM 320U: 902.875 MHz In side this manual the following terms TCM 300x or TCM 320x can be used interchangea- Metasys Integrator 300 Series Point Mapping 7 Metasys NCM CS Object Mapping CS objects often represent an entire device. They also use less memory in the NCM than a corresponding group of standard objects. The Metasys Integrator Tables and Models CD-ROM includes a reference software model, in DDL syntax, for each vendor application. The HS-NCM can also be configured as a high-speed repeater for applications requiring distances beyond the specified limits between two nodes. For configuration and setup info rmation, refer to "HS-NCM Configuration" on page 5. For limitations and network wiring information for the HS-NCM, refer to the High-Speed Noti•Fire•Net Manual. The NCM 300 panel provides intelligent control of Heat Pump or Conventional forced air zoning systems at a maximum of three zones using motorized dampers and practically any off-the-shelf heat/cool thermostat. With features like automatic changeover, opposite system service, short cycle timers and supply air sensing capability, the NCM 300 NEXCOM International Co., Ltd. NEXCOM International Co., Ltd. Published May 2014 nexcom.com Intelligent Digital Security IP Camera NCm-301-V/NCm-301-VM Description. The NCM 300 panel provides intelligent control of Heat Pump or Conventional forced air zoning systems at a maximum of three zones using motorized dampers and practically any off-the-shelf heat/cool thermostat. With features like automatic changeover, opposite system service, short cycle timers and supply air sensing capability, the Amazon.com: EWC Controls NCM300 NCM-300 2/3 ZONE CONTROL PANEL. 1 Images about Amazon.com: EWC Controls NCM300 NCM-300 2/3 ZONE CONTROL PANEL : Amazon.com: EWC Controls NCM300 NCM-300 2/3 ZONE CONTROL PANEL and also Amazon.com: EWC Controls NCM300 NCM-300 2/3 ZONE CONTROL PANEL. manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs including, but not limited to, the exclusive right to copy or reproduce in any form the copyrighted computer Automatically recharges from NCM Serial Interfaces One optically isolated RS-485 interface for N2 connection; 9600 baud Pluggable, 3-position connector Three RS-232-C ports (300 through 19200 baud): •two DB9 male connection •one DB9 male/RJ-12 connection Processor 80386 @ 16 MHz Memory Options Total Memory